Introduction to product application
This product is used for SMT stencil appearance and tension detection. It is equipped with automatic/manual moving guide rail, electronic microscope equipment, digital display tensiometer, high-definition display and host keyboard. The camera automatically moves to stay or manually moves to the position according to the preset running track. The operator can visually detect the defects and defects on the product on the display and make marks to facilitate the timely discovery and solution of problems.

Parameters of main frame light box
1. Main frame material; Steel plate baking varnish
2. Bottom light box light source: customized LED energy-saving light source
3. External dimension: L1200 * W1100 * H1500MM
4. Stencil size: 736 * 736MM
6. Guide rail: customized 900 * 900 guide rail module (to ensure automatic movement of the microscope from front to back, left to right)
7. Glass: 12MM tempered white glass+milky white diffusion plate (soft and even light will not hurt eyes)
8. Tensiometer: LANDTEK digital tension meter (five point tension detection), connected to the computer through Bluetooth, and each group of tension values can be collected and stored on the computer.

Parameters of guide rail module:
X/Y-axis automatic movement
1. Effective stroke: X: 900MM Y: 900MM
2. Moving speed: 380MM/S (adjustable)
3. Positioning accuracy: 0.05MM
4. Controller: PLC touch screen and rocker control. The touch screen can write motion track program and store the motion track. The control mode can be manual or automatic.

Display host CCD microscope parameters
1. Optical power of microscope: 200 times
2. Pixel: 20 million
3. Display: 21 inch 1080P HD display
4. Computer host: WIN7 system Intel processor 1TB hard disk
5. Visual measurement software: it can detect the defects of steel mesh in real time, take photos and store them, and measure the size and distance of mesh with measurement tools.